Parts Which Must Not Be Touched; Red Painted Screws; Variable Resistors On Board; Other Screws - Minolta CF910 Service Manual

Hide thumbs Also See for CF910:

Table of Contents

PARTS WHICH MUST NOT BE TOUCHED

Purpose of Application of Red Paint

Red painted screws show that the assembly or unit secured can only be adjusted or set at

the factory and shall not be readjusted, set, or removed in the field.

Note that when two or more screws are used on the part in question, only one representa-

tive screw may be marked with red paint.

Do not turn the variable resistors (potentiometers) on boards to which no adjusting instruc-

tions are given in "ADJUSTMENT."

Although not marked with red paint, the following screws must not be loosened or read-

Four screws on the 2nd/3rd Mirrors Carriage

Table of Contents