4
USER MODE
• This mode is used to make various settings according to the user's needs, check for the
total counts, and designate the access number for the copy track function.
4-1.
User Mode Menu Screen
• Press the User Mode key on the control panel.
Note
The "Fuser Oil Refill" key appears when the count of "Fus. Oil" of "Life 3 (others)" has
reached a preset value and "Fuser Oil Change" of "Setting" has been set to "User Set."
4-2.
User Mode Setting Procedure
<Setting Procedure>
1. Press the User Mode key on the control panel.
2. Select the function to be set and make settings as required.
3. After the settings are complete, touch the OK key to validate the settings.
Note
The function selected is highlighted.
<Exiting the Mode>
Perform any one of the following steps.
• Press the Panel Reset Key.
• Touch "OK" until the Basic screen appears.
1154S027CA
S-9