Fig. 1
Mounting Bracket
Slot
Fig. 2 Terminal installed position
Fig. 3 Harness Assy mounting position
Red →
Terminal connected to
the Fur Brush Roller.
White →
Terminal connected to
the Toner Collecting
Roller.
Note:
When reinstalling the Scraper Blade, make
sure that the slot is on the left side.
Terminal
Fur Brush Roller/Toner
Collecting Roller
1144D114AA
(Red)
Approx. 60 mm
D-84
Scraper Blade
Replace.
Note:
The protrusion in the terminal should
fit in the indentation in the roller.
Harness Assy
(White)
Approx. 60 mm
Approx. 30 mm
Mounting Bracket
1144D112AA
Approx. 40 mm
1144D113AA