Minolta CF910 Service Manual page 290

10±1
mm
10 20
2. CD-Mag and FD-Mag
4. Check the image on the test copy to see
Specifications
0~1mm
Top Image (leading edge of image):
10 ±1 mm
Left Image (left edge of image): 0 ±1 mm
1144D240AB
5. If the specifications are not met, select
Example
If the scale graduations on the test copy start
with 11.5 mm, subtract 1.5 mm from the cur-
rent setting and input the result as the new
setting.
1154D112CA
6. Using the same procedure, adjust "Left
7. Make a check again by making another
8. After the adjustments have been made,
1. Place scales on the Original Glass as
1144D239AA
D-129
where the graduations of the scales start.
"Top Image" and change the setting using
the shift keys ( or
Image."
test copy.
touch "Ex.".
shown on the left and lower the Original
Cover.
).