Adjustment Of The Amount Of Transfer Drum Retraction - Minolta CF910 Service Manual

(4) Adjustment of the Amount of Transfer Drum Retraction

Fig. 1 Adjusting Procedure
Transfer Adjusting Jig
Retracting Cam
1. Remove the Master Board.
2. Manually turn the Paper Take-Up Motor in the direction of the arrow until the
retracting cam stops.
3. Insert the Jig into the space between the retracting cam and retracting lever. Press
the retracting lever against the retracting cam and, at the same time, tighten the
adjusting screw.
Retracting Cam
Retracting Lever
Fig. 1
Retracting Lever
D-141
Paper Take-
Up Motor
Adjusting Screw
1154D263AD
1154D264AA