Motion Control Assembly Replacement - Toro Z MASTER 2000 Series Service Manual

Motion Control Damper Installation (continued)

Motion Control Assembly Replacement

Motion Control Assembly Removal
Chassis: Service and Repairs
3. Torque the front mounting bolt to 108-135 N• m (90 ± 10 in-lb).
g336042
1. Park the machine on a level surface and disengage the PTO. Stop the
engine, wait for all moving parts to stop, and remove the key.
2. Raise and support the unit so that the drive wheels are off the ground.
Note: The console may be removed for easier access.
Replacement (page 5–11) Right Console Replacement (page 5–13)
3. Remove the 2 bolts securing the motion control handle to the motion control
assembly.
4. Remove the 2 screws securing the motion control cover to the frame.
5. Disconnect the motion control damper from the motion control assembly.
6. Disconnect the motion control linkage from the transmission.
Figure 50
Page 5–28
Left Console
2000 Series Z MASTER® Service Manual
3438-778 Rev A