Setting the Synchronous Measurement Mode
Setting Measurement Mode of the Sensor p.139
Operating procedure
Steps
Key operation
1
2
3
4
5
For more detail, refer to the following.
7-1 Connecting Parallel I/O in Confocal Fiber Type Displacement Sensor.
232
Setting the System
Display
Description
Press and hold the
mode.
Press the
key.
Press the
key.
Select key lock AUTO/PAPA.IN.
The current setting value is displayed on the sub-display.
Press the
display blinks.
In this example, select "PARA.IN" and press the
Press the
For how to save settings, refer to 8-2 Functions of Operating Keys
p.185.
key for two seconds to enter the FUNC
/
keys to select "SYSTEM" and press the
/
keys to select "TRIGER" and press the
/
keys to enter the editing mode, and the sub-
key for two seconds to enter the RUN mode.
ZW-7000 User's Manual
key.