To Connect The E5255A Output - Agilent Technologies Agilent E5250A User Manual

Figure 4-10
Table 4-5
Figure 4-11
Setting up Measurement Environment
Connecting the E5250A Output

To Connect the E5255A Output

The E5255A output connector is shown in Figure 4-10. The E5250A SMU INPUT
signal or the E5255A BIAS INPUT signal appears at the E5255A output connector
as shown in Figure 4-10 when input-output switching path is made.
E5255A Output Connector and Output Signal
A
Input
SMU Force
BIAS Bias line
You can easily connect the E5255A output to the connector plate or your test fixture
by using the cable shown in Table 4-5 and Figure 4-11. The cable can be connected
to the E5255A output ports labeled as 1−8, 1−8 (9−16), or 1−8 (17−24).
E5255A Output Cable
Agilent Model No.
16494D-001
16494D-002
16494D 8-Channel Shielded Coaxial Cable for E5255A
FEMALE
To
E5255A
4-22
B
Guard
Bias line
Ground
8-Ch Shielded Coaxial cable, 1.5m
8-Ch Shielded Coaxial cable, 3m
To
Connector Plate
Agilent E5250A User's Guide, Edition 11
Description
MALE
A
B