NOTE
Syntax
Query response
Example
Command Reference
[:ROUTe]:COUPle[:STATe]?
[:ROUTe]:COUPle[:STATe]?
This command applies only to the E5252A card.
The Couple Port function is not available for the E5255A card.
This query command returns the Couple Port Mode of the specified card. For
details, refer to "Couple Ports" in Chapter 5.
[:ROUTe]:COUPle[:STATe]? card_number
Parameter
card_number
0 or 1 <newline><^END>
0 : Couple Port Mode is OFF
1 : Couple Port Mode is ON.
OUTPUT @Hp5250;":ROUT:COUP:STAT ALL,ON"
OUTPUT @Hp5250;":ROUT:COUP:STAT? 2"
ENTER @Hp5250;A
For above example, A will be as follows:
1
7-38
Explanation
card number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4
Agilent E5250A User's Guide, Edition 11