Agilent Technologies Agilent E5250A User Manual page 320

SCPI Command Summary
This chapter is a quick reference for the SCPI subsystem commands available for
Agilent E5250A. The commands are in alphabetical order.
For details about these commands, see Chapter 7.
For how to specify the channel_list parameter, see Chapter 5.
Textual Notation for Subsystem Commands
[ ] Square brackets are used to enclose optional information not
required for execution of the command sequence. So, you can
omit the characters in brackets, and the command will still
execute correctly.
For example, for the [:ROUTe]:BIAS:PORT command, you can
execute :ROUT:BIAS:PORT or :BIAS:PORT, which are
exactly the same.
italic font Text you supply. For example, for card_number, you enter an
allowed card number. Also, used to represent response data.
12-2 Agilent E5250A User's Guide, Edition 11