Executing Self-Test - Agilent Technologies Agilent E5250A User Manual

Table 3-1

Executing Self-Test

The Self-Test of the E5250A consists of the following three tests:
E5250A Self-Test Items
Test Item Description
Controller Checks the operation of
Test the E5250A firmware.
Front Checks the operation of
Panel the LEDs and key that
Interface are on the E5250A front
Test panel.
Relay Test Checks the operation of
the relays on the cards
installed in the E5250A.
Agilent E5250A User's Guide, Edition 11
Executing Self-Test and Leak Test
Executing Self-Test
Executed by
Turning on the E5250A.
Entering SCPI Command.
Using Self-Test Utility.
Entering SCPI Command
Using Self-Test Utility.
Pressing the Local/
Self Test key.
Entering SCPI Command.
Using Self-Test Utility.
Refer to
page 3-4
page 3-6
page 3-10
page 3-6
page 3-10
page 3-4
page 3-6
page 3-10
3-3