Agilent Technologies Agilent E5250A User Manual page 30

Introduction
Options and Accessories
Contents of the E5250A Program Disk:
Virtual Front
Panel Utility Interactive control program for the E5250A. Runs on Agilent
4155/4156's built-in IBASIC controller. Refer to Chapter 5.
VFP Data Upload
Library Subprogram library used for uploading the E5250A control data
(made by Virtual Front Panel Utility) to your program. Runs on
HP BASIC. Refer to Chapter 6.
Capacitance
Compensation
Routine Subprogram to compensate for capacitance error caused by the
E5250A and E5252A. Runs on HP BASIC. This subprogram is
used to compensate the capacitance data measured by Agilent
4284A Precision LCR Meter. Refer to Chapter 6.
Sample Programs Three sample programs: one for Vth and C measurement using
the E5252A, and two for HCI test and analysis using the
E5255A. Runs on HP BASIC. Refer to Chapter 9.
Self-test Utility Self-test and relay test program for the E5250A. Runs on the
4155/4156's built-in IBASIC controller. Refer to Chapter 3.
1-14 Agilent E5250A User's Guide, Edition 11