To Connect Wiring to a Module
1 Remove the module cover.
.
3 Route wiring through strain relief.
5 Install the module into mainframe.
Cable Tie Wrap
(optional)
• For detailed information on each module, refer
Channel Number:
• To reduce wear on the internal DMM relays,
Slot Channel
• For information on grounding and shielding,
• The diagrams on page 28 show how to connect
To Connect Wiring to a Module
2 Connect wiring to the screw terminals.
4 Replace the module cover.
Wiring Hints...
to the section starting on page 200.
wire like functions on adjacent channels.
see page 259.
wiring to a multiplexer module for each
measurement function.
Chapter 1 Quick Start
4
20 AWG Typical
6 mm
27
1