Agilent Technologies Agilent E5250A User Manual page 204

NOTE
Syntax
Query response
Example
Command Reference
[:ROUTe]:COUPle:PORT?
[:ROUTe]:COUPle:PORT?
This command applies only to the E5252A card.
This query command returns the lower input port number of each coupled pair. For
details, refer to "Couple Ports" in Chapter 5.
[:ROUTe]:COUPle:PORT? card_number
Parameter
card_number
port_number{,port_number} <newline><^END>
port_number = 1 or 3 or 5 or 7 or 9
OUTPUT @Hp5250;":ROUT:COUP:PORT ALL,'1,3'"
OUTPUT @Hp5250;":ROUT:COUP:PORT? 1"
ENTER @Hp5250;A$
In above example, A$ will be as follows:
1,3
7-36
Explanation
card number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4
Agilent E5250A User's Guide, Edition 11