Agilent Technologies Agilent E5250A User Manual page 135

Softkey Menu 2:
For the following conditions, the following softkeys are displayed by selecting the
MORE softkey on Softkey Menu 1.
Cursor points to row of normal input port or to row of input Bias Port with Bias
Mode OFF.
Softkey
OPEN Opens all relays. If Bias Mode is ON, then closes relays to connect
ALL bias enabled output ports to the input Bias Port.
OPEN Opens all relays of row at cursor. If Bias Mode is ON, then closes
ROW relays to connect bias enabled output ports (that are not connected
to other input ports) to the input Bias Port.
CLOSE Closes all relays of row at cursor. And all output ports are
ROW disconnected from the input Bias Port.
MORE Displays softkey menu 1.
RETURN Displays the previous level of softkey menu.
Softkey Menu 3:
For the following conditions, the following softkeys are displayed by selecting the
MORE softkey on Softkey Menu 1:
Cursor points to row of input Bias Port and Bias Mode is ON.
Softkey
OPEN Opens all relays, then connects all bias enabled output ports to the
ALL input Bias Port.
DISABLE Bias disables all output ports. So relays open to disconnect all
ROW output ports from the input Bias Port.
ENABLE Bias enables all output ports, then connects all output ports (that
ROW are not connected to another input port) to the input Bias Port.
MORE Displays softkey menu 1.
RETURN Displays the previous level of softkey menu.
Agilent E5250A User's Guide, Edition 11
Controlling the E5250A
Using Virtual Front Panel Utility
Description
Description
5-41