Modifying The Program - Agilent Technologies Agilent E5250A User Manual

Modifying the Program

This section explains how to modify the sample program:
• "To change the GPIB Address"
• "To change the header of the measurement result report"
• "To output the measurement report to printer"
• "To execute the 4155/4156 calibration"
• "To save the 4155/4156 measurement data"
• "To change the Vth measurement setup"
• "To change the capacitance measurement setup"
• "To use the VFP data upload library"
To change the GPIB Address
You can EDIT the program to change the following parameters in the
Init_setting subprogram.
Parameter
Hpib_sc
Ad415x
Ad4284
Ad5250
To change the header of the measurement result report
You can EDIT to change the following parameters in the Init_setting
subprogram. This is for header of report displayed on the computer. For the display
example, refer to Figure 9-2.
Parameter
Usercomm$ Header comment (title) of the report.
Test_num Initial number for numbering the test
item. If value is 0, the first test item
will be number 1.
Agilent E5250A User's Guide, Edition 11
Vth and Capacitance Measurement Program
Description
GPIB select code
GPIB address for the 4155/4156
GPIB address for the 4284A
GPIB address for the E5250A
Description
Executing Sample Programs
Default
7
17
24
22
Default
"Vth C Meas. Sample Program"
0
9-11