Agilent Technologies Agilent E5250A User Manual page 308

Error Messages
Standard SCPI Error Messages
Error
Number
Invalid separator
-103
An illegal character was received when a separator was expected; for
example, the semicolon was omitted between multiple commands in
a program message.
Data type error
-104
An improper data type was received; for example, numeric data was
expected but string data was received.
GET not allowed
-105
A group execute trigger was received within a program message.
Parameter not allowed
-108
Too many parameters for the command were received.
Missing parameter
-109
Fewer parameters were received than required for the command.
Command header error
-110
An error was detected in the header. This error message is reported if
the E5250A cannot determine the more specific header errors -111
through -114.
Header separator error
-111
An illegal character for a header separator was received; for
example, no white space between the command header and
parameter.
Program mnemonic too long
-112
A keyword in the command header contains more than twelve
characters.
Undefined header
-113
An undefined command header was received; for example, *XYZ or
:ROUT:OPEN:COOD.
11-4
Error Message and Description
Agilent E5250A User's Guide, Edition 11