Agilent Technologies Agilent E5250A User Manual page 132

Controlling the E5250A
Using Virtual Front Panel Utility
You can define labels to use for the input ports of each row in the MEMORY
SETUP PANEL. Refer to "Defining Labels for the E5250A Input Ports" on page
5-31.
The following softkeys are displayed for MEMORY SETUP PANEL:
Softkey
CHANGE For changing the settings in the Current Setup Memory. See
CHAN later. Displays cursor for input-output crosspoints and some
softkeys.
COMMENT For entering a comment for the setup memory. See next page.
NEXT (Displayed only for NORMAL Config mode, not AUTO Config
CARD mode.) Displays MEMORY SETUP PANEL of next card for
changing settings.
SWITCH (Displayed only for AUTO Config mode, not NORMAL Config
PAGE mode.) Displays other page of MEMORY SETUP PANEL if
more than 48 output ports. This softkey is displayed if the
E5250A is configured for multiplexer that has more than 48
outputs (example, 2×96 multiplexer). This softkey toggles
between the MEMORY SETUP PANEL for outputs 1 to 48, and
for 49 to 96.
NEXT Changes the Current Setup Memory to next setup memory
SETUP number. Increases the Current Setup Memory number by 1. And
changes the E5250A to the new settings.
PREV Changes the Current Setup Memory to previous setup memory
SETUP number. Decreases the Current Setup Memory number by 1. And
changes the E5250A to the new settings.
GOTO For changing the E5250A to settings of specified setup memory.
SETUP See later. Changes Current Setup Memory to specified setup
memory number.
SETUP Returns to the SETUP MEMORY MENU.
MEMORY
5-38
Description
Agilent E5250A User's Guide, Edition 11