Diagnostic Subsystem - Agilent Technologies Agilent E5250A User Manual

NOTE

:DIAGnostic Subsystem

The :DIAGnostic subsystem has commands for executing the self-test function. For
more info, see Chapter 3.
The :DIAGnostic subsystem commands ignore the E5250A channel configuration
mode. For :DIAG commands that require a card number, you specify 1, 2, 3, 4, or
ALL.
:DIAGnostic Command Tree
Command
:DIAGnostic
:TEST
:CARD
:FRAMe
Parameter values:
card_number: 1 | 2 | 3 | 4
Agilent E5250A User's Guide, Edition 11
card_number | ALL
:CLEar
card_number | ALL
[:EXECute]?
card_number
:STATe?
CONTroller | FPANel
:CLEar
CONTroller | FPANel
[:EXECute]?
CONTroller | FPANel
:STATe?
Command Reference
:DIAGnostic Command Tree
Parameter
7-15