Agilent Technologies Agilent E5250A User Manual page 214

Syntax
Query response
NOTE
Example
Command Reference
:SYSTem:CTYPe?
:SYSTem:CTYPe?
This query command returns the ID of the specified card.
This command has query form only.
:SYSTem:CTYPe? card_number
Parameter
card_number
HEWLETT-PACKARD,model,0,revision <newline><^END>
model = E5252A or E5255A
revision = A.01.00 or later version
If designated card is not installed or initialize failed, this command returns
NONE,NONE,0,0
OUTPUT @Hp5250;":SYST:CTYPE? 1"
ENTER @Hp5250;A$
7-46
Explanation
card number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4
Agilent E5250A User's Guide, Edition 11