Agilent Technologies Agilent E5250A User Manual page 101

Table 5-2
NOTE
Card Number
Channel Configuration
you specified
Normal Configuration
Auto Configuration
In the channel_list, you can specify multiple channels by using comma (,) or colon
(:) as follows:
Comma: use between each specified channel as in following examples:
• (@10101,10102,10103) means 10101, 10102 and 10103.
• (@10112,10202) means 10112 and 10202.
• (@11010,20102) means 11010 and 20102.
Colon: use to specify a range of channels as in following examples:
• (@10101:10103) means 10101, 10102, and 10103.
• (@10112:10202) means 10112, 10201, and 10202.
• (@11012:20102) means 11012, 20101, and 20102.
As shown in last two examples, you can specify a range across input ports and card
slots.
In the Auto Configuration mode, you can omit any zeros at beginning of channel.
For example, channel 00101 can be expressed by 101.
Agilent E5250A User's Guide, Edition 11
Slot No. Card is Installed
1
2
3
4
1 to 4
Controlling the E5250A
Switch Control Basics
Card No.
1
2
3
4
0
5-7