Agilent Technologies Agilent E5250A User Manual page 178

Syntax
Example
NOTE
Command Reference
*RST
*RST
This command performs an instrument reset. Status after *RST is shown below:
Channel Configuration:
Connection Rule:
Connection Sequence:
Bias Mode:
Bias Port:
Bias Enabled Channels:
Couple Port Mode:
Couple Port:
Card Channel Status:
Self-Test Result:
*RST
OUTPUT @Hp5250;"*RST"
This command does not change the self-test result.
For the power-on settings, see :SYSTEM:CPON.
7-10
Normal Config Mode
Free
Break Before Make
Off
• E5252A: 10
• E5255A: None
All channels (output ports) are bias enabled
Off
No Couple Port
All relays open
No Change
Agilent E5250A User's Guide, Edition 11