Figure 5-2
Output Port
Controlling the E5250A
Switch Control Basics
Example of Bias Mode
Input 01
Bias Port
Input 02
Input 03
Input 10
Open
Close
Connect to Bias port
Figure 5-2 shows an example. Input port 2 is the input Bias Port. When the Bias
Mode is turned ON, all bias enabled output ports (that are not connected to other
input ports) are connected to the input Bias Port. So, the output ports that are
connected to input port 1 and 3 are not connected to the input Bias Port.
5-12
Connect to Input 3
Agilent E5250A User's Guide, Edition 11
Connect to Input 1