Agilent Technologies Agilent E5250A User Manual page 196

NOTE
Syntax
Query response
Example
Command Reference
[:ROUTe]:BIAS:PORT?
[:ROUTe]:BIAS:PORT?
This command applies only to the E5252A card.
For the E5255A card, the input Bias Port cannot be selected, and is always the
built-in Bias Port.
This query command returns the input Bias Port number for the specified card.
[:ROUTe]:BIAS:PORT? card_number
Parameter
card_number
port_number <newline><^END>
port_number = 1 to 10
OUTPUT @Hp5250;":ROUT:BIAS:PORT ALL,4"
OUTPUT @Hp5250;":ROUT:BIAS:PORT? 1"
ENTER @Hp5250;A
For above example, A will be as follows:
4
7-28
Explanation
card number:
For Auto Config mode: 0
For Normal Config mode: 1, 2, 3, or 4
Agilent E5250A User's Guide, Edition 11