Bias Mode Example - Agilent Technologies Agilent E5250A User Manual

Figure 6-2
Required
Conditions:
Programming the E5250A
Programming Examples

Bias Mode Example

The following example shows how to use Bias Mode for the E5255A.
Example of Bias Mode
This program assumes the following conditions.
E5250A Installed Cards:
• Slot 1: E5255A
• Slot 2 to 4: not used.
E5250A Input Ports:
• SMU INPUT 1: should be connected to instrument.
• SMU INPUT 2 to 6: not used.
• AUX INPUTs: not used.
E5255A Connection:
• IV Input Connection: IVin1 should be connected to the E5250A SMU INPUT 1.
• Bias Input Connection: BIAS INPUT 51 should be connected to bias source.
E5255A Output Ports:
• Block 1: outputs 1 to 8 are used in the program.
• Block 2 and 3: not used.
6-16 Agilent E5250A User's Guide, Edition 11