Agilent Technologies Agilent E5250A User Manual page 87

Application
Agilent
Model No.
C C Meter
Measurement
Pulse Input Pulse
Generator
Bias Input Power
Supply
Figure 4-6
Instrument
Output
Connector
High, Low
OUTPUT
OUTPUT
In the table above,
• AUX means CV1, CV2, HF1, or HF2 connector.
• The E5250A does not have input connectors for the interlock. Connect directly
from instrument to the connector plate which has an interlock connector.
• Can't use Agilent 41422A/41423A (HCU/HVU) of the 4142B with the E5250A.
• To connect instrument output that uses banana plug to AUX connector, use Dual
Banana plug to BNC Adapter (Agilent part number 1251-2277).
Figure 4-6 shows an example of connecting the E5250A to the 4156.
Connection Example with Agilent 4156
Kelvin Triaxial Cable
Triaxial Cable
BNC Cable
Agilent 4156
Agilent E5250A User's Guide, Edition 11
Setting up Measurement Environment
E5250A
Input
Connector
CV1 and 2 BNC cable
HF1 or 2 BNC cable
AUX1 to 4 BNC cable
Agilent E5250A
INTLK Cable
Connecting the E5250A Input
Cable Required
SMU
AUX
GNDU
INTLK
Connector Plate
4-17