Agilent Technologies Agilent E5250A User Manual page 209

Syntax
Query response
Example
[:ROUTe]:OPEN[:LIST]?
This query command returns 0 or 1 for each channel specified by channel_list, in
same order as specified by channel_list.
0: channel is closed (connected), 1: channel is opened (not connected).
[:ROUTe]:OPEN[:LIST]? (@channel_list)
Parameter
channel_list
open_status{,open_status} <newline><^END>
1 : opened
0 : closed
OUTPUT @Hp5250;":ROUT:OPEN:CARD ALL"
OUTPUT @Hp5250;":ROUT:CLOS (@10101,10202)"
OUTPUT @Hp5250;":ROUT:OPEN? (@10101,10102,10201,10202)"
ENTER @Hp5250;A$
In above example, A$ will be as follows:
0,1,1,0
Agilent E5250A User's Guide, Edition 11
Explanation
Channels to check. For details about channel_list,
refer to Chapter 5.
Command Reference
[:ROUTe]:OPEN[:LIST]?
7-41