Disassembling The Seal Ring Retainer; Checking The Fork Legs - Husqvarna FE 350 2015 Repair Manual

6
FORK, TRIPLE CLAMP

Disassembling the seal ring retainer

Info
The steps are identical for both fork legs.
6.18 Checkin the fork le s
-
Remove shim stack (3.
-
Remove washer
-
Remove 0-ring
Preparatory work
-
Disassemble the fork legs.
-
Remove the spring.
-
Disassemble the cartridge.
Main work
-
Remove pilot bushing support
-
Remove 0-ring
Condition
The fork legs have been disassembled.
-
Check the inner tube and axle clamp for damage.
If there is damage:
-
Change the inner tube.
200728-10
-
Measure the outside diameter at multiple locations of the inner tube.
Outside diameter of inner tube
If the measured value is smaller than the specified value:
-
Change the inner tube.
@.
@).
(� p. 17)
(� p. 19)
(� p. 20)
O.
8 8.
and seal ring
47.975 ... 48.005 mm (1.88878 ...
1.88996 in)
23