Disassembling The Hydrostop Unit; Disassembling The Seal Ring Retainer - Husqvarna FC 250 2016 Repair Manual

6 FORK, TRIPLE CLAMP
24
Disassemblin the hydrostop unit
Info
The procedures are the same on both fork legs.
R00040-10
Disassemblin the seal rin
Info
The steps are identical for both fork legs.
-
Remove valve needle@) from the piston rod.
Info
The adjusting tube can be used for this.
Preparatory work
-
Disassemble the fork legs.
Main work
O .
-
Remove nut
8 .
-
Remove hub
-
Remove O-ring from the hub.
-
Remove shim set (5).
8 .
-
Remove washer
0.
-
Remove O-ring
retainer
Preparatory work
-
Disassemble the fork legs.
-
Remove the spring. (0 p. 20)
-
Disassemble the cartridge.
(!!:,!I p. 18)
(!!:,!I p. 18)
(0 p. 21)
..