Removing The Transmission Shafts; Removing The Crankshaft; Work On Individual Parts; Work On The Right Section Of The Engine Case - Husqvarna FC 450 2014 Repair Manual

17 ENGINE
17.3.34

Removing the transmission shafts

17.3.35

Removing the crankshaft

17.4 Work on individual �arts
17.4.1

Work on the right section of the engine case

Q.
-
Remove O-ring
-
Position the engine upright.
8.
-
Remove lock ring
-
Pull both transmission shafts out of the bearing seats together.
Info
Make sure not to misplace the washers.
-
Attach the special tool to the crankshaft.
I
Protection cap (75029090000) (
O
-
Mount special tool onto the engine case with suitable screws.
I
Removal tool (78029049100) (
-
Press the crankshaft out of the bearing seat.
-
Take out crankshaft .
-
Remove the special tools.
-
Take the right section of the engine case.
off
Preparatory work
-
Remove the oil pressure regulator valve. (
..- p. 224)
..- p. 226)
..- p. 145)
142