18.3.40
Removing the crankshaft
18.4
Working on individual parts
18.4.1
Work on the right section of the engine case
-
Secure the engine in an upright position.
8.
-
Remove lock ring
-
Pull out both transmission shafts together from the bearing
seats.
Info
Do not lose the washers.
-
Attach the special tool to the crankshaft.
I
Protection cap (75029090000)
O
-
Mount special tool
onto the engine case with suitable
screws.
I
Puller (90129048100)
(�
-
Press the crankshaft out of the bearing seat.
-
Take out crankshaft .
-
Remove the special tools.
-
Take off the right section of the engine case.
Preparatory work
-
Remove the oil pressure regulator valve.
(�
p. 317)
p. 321)
(�
p. 179)
18 ENGINE
175