Smart Speed Assembly Replacement - Toro TIMECUTTER 74685 Service Manual

Smart Speed Assembly Replacement

Smart Speed Assembly Removal
Chassis: Service and Repairs
1. Park the machine on a level surface and set the parking brake. Stop the
engine, wait for all moving parts to stop and remove the key.
2. To relieve tension on deck lift handle, place wood blocks (2x4 inches) under
each side of the deck. Lower the deck until tension is relieved from the lift
handle.
3. Flip the seat forward and remove the seat switch connection.
g301716
4. Flip the seat back to the operator position.
5. Remove the 2 (T-27) screws from the front of the seat pan.
g301717
6. Lift and remove the seat from the seat rod.
Figure 167
Figure 168
Page 5–74 TIMECUTTER® Service Manual
3433-938 Rev A