Fuel Tank Replacement
Fuel Tank Removal
TIMECUTTER® Service Manual
3433-938 Rev A
1. Park the machine on a level surface and set the parking brake. Stop the
engine, wait for all moving parts to stop and remove the key.
2. Flip the seat forward.
3. Using a T–30 torque bit, remove the 3 screws (per pod) securing the pod
to the pod support brackets.
4. Remove the fuel cap on the LH side pod.
5. Move the motion control from the neutral lock to the neutral position.
6. Remove the LH pod from the machine.
7. Install the fuel cap to the LH pod to prevent fuel spill. Fully tighten.
g301703
8. Remove the spring clamps securing the fuel hose and the fuel vent hose.
Remove the fuel hose and fuel vent hose from the fuel tank fittings. Cap
all hoses.
Note: The fuel tank labels both vent and fuel ports and line orientation.
Figure 73
Page 5–25
Chassis: Service and Repairs