MYRIDE® Seat/Platform Removal (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
2. Disconnect the battery by removing the negative battery cable first, then
the positive cable from the battery.
3. Lift the seat forward.
4. Disconnect the seat switch.
5. Remove the 3/8 inch head bolt securing the seat stop bracket to the seat
mount. Remove the seat stop bracket from the machine.
6. Lower the seat. Slide the seat to the most forward position.
7. Remove the seat from the machine.
g301739
8. Remove the 2 (1/2 inch) bolts securing the seat mount to the MYRIDE®
platform.
g301740
9. Remove the seat mount from the machine.
Figure 84
Figure 85
Page 5–31
Chassis: Service and Repairs