Toro TIMECUTTER 74685 Service Manual page 121

Motion Control Actuator Installation (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
g301704
11. Install the RH pod to the machine.
12. Move the control panel into position on the machine. Using a Philips head
screw driver, hand tighten the screw securing the control panel to the RH pod.
g301692
13. Install the smart speed knob to the smart speed lever. Using a Philips head
screw driver, hand tighten the screw securing the smart speed knob to the
smart speed lever.
Figure 161
Figure 162
Page 5–71 Chassis: Service and Repairs