Toro TIMECUTTER 74685 Service Manual page 142

Deck Lift Assembly 3 Point Installation (continued)
Chassis: Service and Repairs
3. Install the 9/16 inch bolt and nut securing the lift link to the chassis. Repeat
for opposite side. Torque bolt and nut to 40.5–44.5 N • m (30–33 ft-lb).
g301968
4. Install the 2 hair pin and washers to connect the lift link to the deck lift
bellcrank.
g301967
5. Raise the deck lift handle.
6. Place the RH pod into position on the machine.
7. Install the control panel. Hand tighten with the screw securing the control
panel to the RH pod.
Figure 200
Figure 201
Page 5–92 TIMECUTTER® Service Manual
3433-938 Rev A