Toro TIMECUTTER 74685 Service Manual page 194

PTO Clutch Installation (continued)
PTO Clutch Testing
Electrical System: Service and Repairs
g300625
2. Connect the wiring to the clutch.
g300624
3. Install the deck belt to the clutch pulley.
4. Using an appropriate lifting device, lower the machine.
5. Connect the positive battery cable first, then the negative battery cable to
the battery.
1. Park the machine on a level surface and set the parking brake. Stop the
engine, wait for all moving parts to stop and remove the key.
2. Disconnect the clutch wire connector.
3. Set the multi-meter to measure resistance (OHMs setting).
4. Connect the meter lead wires to the terminals in the clutch connector.
Figure 271
Figure 272
Page 8–6 TIMECUTTER® Service Manual
3433-938 Rev A