Toro TIMECUTTER 74685 Service Manual page 133

Smart Speed Assembly Installation (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
g301691
15. Remove the fuel cap from the fuel tank.
16. Install the LH pod to the machine.
Note: The LH and RH pod install are the same except the RH pod has the
control panel and smart speed knob.
17. Move the motion control from the neutral lock to the neutral position.
18. Using a T–30 torque bit, install the 3 screws securing the pod to the pod
support brackets. Repeat for opposite side. Torque screws to 11 N • m (100
in-lb).
19. Install the fuel cap on the LH side pod.
20. Lift and install the seat to the seat rod.
g301718
Figure 183
Figure 184
Page 5–83 Chassis: Service and Repairs