Hydro Transaxle Installation (continued)
Hydrostatic Drive System: Service and Repairs
g302067
g302068
8. Install the wheel to the transaxle hub.
9. Install the 13/16 inch lug nut securing the wheel to the transaxle hub. Torque
lug nut to 94.5–122 N • m (70–90 ft-lb).
10. Using an appropriate lifting device, lower the rear of the machine.
11. Connect the battery by installing the positive battery cable first, then the
negative cable to the battery.
Figure 247
Figure 248
Page 6–18
TIMECUTTER® Service Manual
3433-938 Rev A