Toro TIMECUTTER 74685 Service Manual page 138

Deck Lift Assembly 3 Point Removal (continued)
Chassis: Service and Repairs
12. Using a T–30 torque bit, remove the 3 screws securing the pod to the pod
support brackets. Repeat for opposite side.
13. Move the motion control from the neutral lock to the neutral position.
14. Using Philips head screw driver, remove the screw securing the smart speed
knob to the smart speed lever. Remove the smart speed knob from the smart
speed lever.
g301691
15. Using a Philips head screw driver, remove the screw securing the control
panel to the RH pod. Move the control panel to the side.
g301692
16. Remove the RH pod from the machine.
17. Lower the deck lift handle all the way to the bottom.
Figure 192
Figure 193
Page 5–88 TIMECUTTER® Service Manual
3433-938 Rev A