Deck Lift Assembly 3 Point Installation (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
g301692
8. Install the smart speed knob to the smart speed lever. Hand tighten with the
screw securing the smart speed knob to the smart speed lever.
g301691
9. Move the motion control from the neutral position to the neutral lock position.
10. Install the 3 screws (per pod) securing the pod to the pod support brackets.
Torque screws to 11 N • m (100 in-lb).
11. Flip the seat back into position.
12. Slide the deck into position under the machine.
13. Remove the wood blocks from under the deck.
14. Install the front deck hanger to the deck. Install the cotter pin and washer
securing the front deck hanger to front deck weldment.
Figure 202
Figure 203
Page 5–93
Chassis: Service and Repairs