Front Chassis Storage Box Replacement - Toro TIMECUTTER 74685 Service Manual

Deck Lift Assembly 4 Point Installation (continued)

Front Chassis Storage Box Replacement

Front Chassis Storage Box Removal
TIMECUTTER® Service Manual
3433-938 Rev A
12. Install the 2 cotter pins and washers securing the deck lift links to the deck
lift. Repeat for other side.
13. Install the 2 RH lift links. Install the 2 (9/16 inch) nuts and bolts securing
the 2 RH lift links to the chassis. Torque bolts and nuts to 40.5–44.5 N •
m (30–33 ft-lb).
14. Install the 2 (1/2 inch) bolts and 2 (9/16 inch) nuts securing the rear trailing
arm to the deck. Torque bolts and nuts to 40.5–44.5 N • m (30–33 ft-lb).
15. Install the deck belt to the PTO clutch.
16. Using a spring puller, install the deck tension spring to the deck tension
spring anchor.
17. Install the LH 4 (3/8 inch) bolts securing the belt cover to the deck. Torque
bolts to 19.5–22.5 N • m (175–200 in-lb).
18. Raise the deck off the wood blocks.
19. Install the height-of-cut pin to the height-of-cut gate. Add tension to the
height-of-cut pin.
1. Park the machine on a level surface and set the parking brake. Stop the
engine, wait for all moving parts to stop and remove the key.
2. Remove the 2 (9/16 inch) bolt from the front license plate.
g301973
3. Lift up and remove the license plate from the chassis.
Figure 212
Page 5–99 Chassis: Service and Repairs