Toro TIMECUTTER 74685 Service Manual page 134

Smart Speed Assembly Installation (continued)
Chassis: Service and Repairs
21. Install the 2 (T-27) screws to the front of the seat pan. Torque screws to
11 N • m (100 in-lb).
g301717
22. Flip the seat back to the operator position.
23. Flip the seat forward and install the seat switch connection.
g301716
24. Raise the deck until tension is added to the lift handle. Remove the wood
blocks (2x4 inches) under each side of the deck.
Figure 185
Figure 186
Page 5–84 TIMECUTTER® Service Manual
3433-938 Rev A