Caster Fork Replacement - Toro TIMECUTTER 74685 Service Manual

Caster Fork Replacement

Caster Fork Removal
TIMECUTTER® Service Manual
3433-938 Rev A
1. Park the machine on a level surface and set the parking brake. Stop the
engine, wait for all moving parts to stop and remove the key.
2. Using an appropriate lifting device, raise the front of the machine off the floor.
3. Remove the ¾ inch bolt and nut securing the wheel to the caster fork.
Remove the wheel from the machine.
g300687
4. Using a flat head screw driver, remove the top dust cover.
g308652
5. Remove the ½ inch bolt securing the caster fork to stub shaft.
6. Remove the caster fork from the stub shaft.
Figure 53
Figure 54
Page 5–15 Chassis: Service and Repairs