Smart Speed Assembly Removal (continued)
Chassis: Service and Repairs
g301691
13. Using a Philips head screw driver, remove the screw securing the control
panel to the RH pod. Move the control panel to the side.
g301692
14. Remove the RH pod from the machine.
15. Remove the spring clamps securing the fuel hose and the fuel vent hose.
Remove the fuel hose and fuel vent hose from the fuel tank fittings. Cap
all hoses.
Note: The fuel tank labels both vent and fuel ports and line orientation.
Figure 171
Figure 172
Page 5–76
TIMECUTTER® Service Manual
3433-938 Rev A