Toro TIMECUTTER 74685 Service Manual page 73

Pod Removal (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
4. Remove the fuel cap on the LH side pod.
5. Move the motion control from the neutral lock to the neutral position.
6. Remove the LH pod from the machine.
Note: The LH and RH pod removal are the same except the RH pod has the
control panel and smart speed knob.
7. Using Philips head screw driver, remove the screw securing the smart speed
knob to the smart speed lever. Remove the smart speed knob from the smart
speed lever.
g301691
8. Using a Philips head screw driver, remove the screw securing the control
panel to the RH pod. Move the control panel to the side.
g301692
9. Remove the RH pod from the machine.
Figure 69
Figure 70
Page 5–23 Chassis: Service and Repairs