Toro TIMECUTTER 74685 Service Manual page 113

Steering Control Box Installation (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
g301692
16. Install the smart speed knob to the smart speed lever. Hand tighten with the
screw securing the smart speed knob to the smart speed lever.
g301691
17. Place the LH pod into position on the machine.
18. Move the motion control from the neutral position to the neutral lock position.
19. Install the fuel cap on the LH side pod.
20. Install the 3 screws (per pod) securing the pod to the pod support brackets.
Torque screws to 11 N • m (100 in-lb).
21. Flip the seat back into position.
22. Install the seat onto the seat rod.
Figure 146
Figure 147
Page 5–63 Chassis: Service and Repairs