Toro TIMECUTTER 74685 Service Manual page 97

Steering Control Box Removal (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
g301718
7. Using a T–30 torque bit, remove the 3 screws securing the pod to the pod
support brackets. Repeat for opposite side.
8. Remove the fuel cap on the LH side pod.
9. Move the motion control from the neutral lock to the neutral position.
10. Remove the LH pod from the machine.
Note: LH and RH pod removal are the same except the RH pod has the
control panel and smart speed knob.
11. Reinstall the fuel cap to the LH pod to prevent fuel spill. Fully tighten.
g301703
12. Using Philips head screw driver, remove the screw securing the smart speed
knob to the smart speed lever. Remove the smart speed knob from the smart
speed lever.
Figure 114
Figure 115
Page 5–47 Chassis: Service and Repairs