Toro TIMECUTTER 74685 Service Manual page 83

MYRIDE® Seat/Platform Removal (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
g301692
14. Remove the RH pod from the machine.
15. Move the MYRIDE® adjustment lever to most forward position. Relieve the
tension from the MYRIDE® adjustment spring cable.
g301755
16. Remove the MYRIDE® assist spring from the MYRIDE® cam assembly
and the frame.
Note: Long end secures towards the front of the machine.
17. Move the MYRIDE® adjustment lever to the most rearward position. Using a
½ inch wrench, remove the front nut from the MYRIDE® cable. Remove the
MYRIDE® cable from the cam assembly.
18. Unscrew the knob. Remove the ½ inch bolt and 9/16 inch nut securing the
cam to the chassis.
Figure 88
Figure 89
Page 5–33 Chassis: Service and Repairs