Toro TIMECUTTER 74685 Service Manual page 69

Stub Shaft Removal (continued)
TIMECUTTER® Service Manual
3433-938 Rev A
2. Using an appropriate lifting device, raise the front of the machine off the floor.
3. Remove the ¾ inch bolt and nut securing the wheel to the caster fork.
Remove the wheel from the machine.
g300687
4. Using a flat head screw driver, remove the top dust cover.
g300688
5. Remove the ½ inch bolt securing the caster fork to stub shaft. Remove the
caster fork from the stub shaft.
6. Remove the 4 (9/16 inch) nut and bolt (3 front, 1 back) securing the stub
shaft to the front axle asm.
Figure 61
Figure 62
Page 5–19 Chassis: Service and Repairs